15
4.11 Footrest lock (optional)
• By pulling the release strap the footrest lock is disengaged and the
footrest can be folded for better storage. If you swing the footrest
down again, it will lock automatically.
4.12 Detaching and attaching the seat unit
For easier transport handling you can dismantle your BINGO in two
parts by detaching the seat unit easily from the streetframe. This is
also of value, if you want to use the BINGO seat unit on an indoor
mobility base.
Before you detach or attach the seat unit always secure the
pushchair by putting on the brake.
Detaching
• Stand beside the seat unit.
• Hold the seat with one hand on the front seat edge.
• Pull the lock pin underneath the seat with thumb and middle finger
and slide the seat unit slightly forward.
• Hold now the seat unit on back and front seat edge and lift the
seat unit from the trapezium adapter.
Attaching
• Hold the seat unit on back and front seat edge.
• Stand with the seat unit in your hands beside the mobility base.
• Put the seat unit from above and slightly forward from the end
position onto the base adapter
• Slide the seat unit backwards until you can hear the lock pin click
in place.
• Check by pulling the seat sharply forward that the seat unit is
properly engaged.
• Check that the lock pin is completely engaged. Push in completely,
if necessary.
Caution!
Excess strap ends on accessories may be trapped
between the two parts of the seat mounting interface
and prevent a full engagement of the lock pin. In such
a case the seat could fall off the mobility base. Shorten
excess strap ends on accessories so that they can not be
trapped. Check by pulling the seat sharply forward that
the seat unit is properly engaged. Check that the lock pin
is completely engaged. Push in completely, if necessary.
4.13 Use of the seat unit in a reverse riding direction
The seat unit can also be used in a reverse riding direction.
The pushchair can still be folded in this configuration.