26
5.12 Ankle hugger
Ankle hugers allow a comfortable fixation of the foot joints. They are
fixed to anchors on the foot plate.
The heel should be placed against the heel plate of the footrest.
The belts are opened/closed and adjusted with velcro straps.
5.13 Frame padding
Fit the frame padding around the pushbar and close the hook & loop
strap.
Turn the hook & loop closure down and pull the frame padding down
over the folding guard and front frame screw connection.
Before folding the pushchair, lift the padding up until the folding
guard is free.
5.14 Groin strap
We recommend you to take the seat off the mobility base to mount
the groin strap.
Thread the tensioning straps for the thigh belts (the end with a loop)
through the slots on the right and left side in the lower end of the
back base.
Thread the free end through the loop and tighten the tensioning
strap. Now pull the free ends of the tensioning straps toward the seat
padding.
Then thread the tensioning straps into the buckles .
Position the groin strap with the quick-release buckles on the thigh
belts pointing downwards on the seat surface.
Caution!
Excess strap ends on accessories may be trapped
between the two parts of the seat mounting interface
and prevent a full engagement of the lock pin. In such
a case the seat could fall off the mobility base. Shorten
excess strap ends on accessories so that they can not be
trapped.
