32
Adjustable ratchet joints are used to set the angle of the canopy.
Spread the canopy and wrap over the backrest of the seat.
Canopy with rain cover:
Take the rain cover out of the bag attached to the wrap, unfold the
rain cover, pull it over the unfolded canopy and put it over the footrest
assembly.
The angle adjustment of the backrest is limited because
of the transparent rain cover. The angle adjustment is
adapted to a seat and knee angle of 90°. Use the space
in tilt function to adjust a stationary position.
5.24 Attendant brake
The BINGO mobility base can be fitted with an attendant brake.
The brake mechanism can be operated with a single lever and a
cable switch or with two independent brake lever.
The attendant brake is designed to be a brake and not
a wheel lock for parking. For parking the original wheel
lock remains in function.
Adjustments:
The attendant brake set is pre adjusted. Nevertheless, if adjustments
become necessary just after installation or after a period of use there
are following options:
After loosening the counter nut at the brake cable switch the pre
tension of both brake slings can be adjusted simultaneously by the
setscrew.
Tighten the counter nut firmly again.
At the exit of each brake housing a cranked set screw leads the
brake cable away from the tyre of the rear wheel. After loosening the
counter nut the pre tension of the individual (left or right) brake can
be adjusted.
Tighten the counter nut firmly again and ensure that the crank of the
set screw shows towards the rear frame, away from the tire.
By adjusting the setscrews you can achieve an equable
braking of the rear wheels.
