10
If your BINGO seat unit is supplied with a short backrest
(BINGO OT) please proceed as follows:
• Loose and remove just one of the mounted knurled nuts and
the belt guides at the back of the backrest. Hold the screw in its
position or plug the screw into the alternative position.
• Fix the backrest upholstery (with the Velcro fasteners) onto the
backrest.
• Pull the corresponding strap which is fixed on the backrest above
the backrest plate and plug the end of the strap onto the screw.
• Plug the belt guide and seize the knurled nut.
• Proceed in the same way on the other side.
• Plug the backrest upholstery between backrest and seat unit and
fix the backrest upholstery onto the back edge of the seat.
For transportation the armrests of the BINGO OT has been
detached.
• Loose the fasteners of the premounted armrests.
