28
Closing the fixation jacket:
• Place your child into the seat.
• Close the zipper.
• Hold the vest against the child’s chest and close the open
quickrelease buckles. If required, re-tighten the individual fixation
vest straps in the cam-lock buckles.
• If required, re-tighten the individual fixation jacket straps in the
cam-lock buckles.
5.16 Chest-shoulder harness
To attach the chest-shoulder harness, rivet (from inside to outside)
the four cam-lock buckles to the outside of the back plate.
Guide the shoulder straps for the chest-shoulder harness backwards
through the designated slots.
Thread the lower straps through the slots in the lower part of the
back base (see also 5.8 lap belt) to the rear.
Alternatively the lower straps can be threaded backwards between
seat and seatback through the roll loops which are mounted with the
carriage bolts and knurled nuts of the hip pads.
Thread all straps through the open cam-lock buckles and clamp in
position by closing the hinged cam.
Caution!
Excess strap ends on accessories may be trapped
between the two parts of the seat mounting interface
and prevent a full engagement of the lock pin. In such
a case the seat could fall off the mobility base. Shorten
excess strap ends on accessories so that they can not be
trapped.
To put the chest-shoulder harnesss on:
• Before seating the child in the pushchair, release the four cam-lock
buckles on the back plate.
• Pull the chest and shoulder pad slightly to the front, open the
hinged cams at the lower end of the pad and pull the straps out.
• Place the straps on the sides of the seat.
• Place your child into the seat
• Pull the chest and shoulder pad over the head onto the chest.
• Next, thread the straps into the lower cam-lock buckles of the pad
all the way to the stop rivets and close the buckles.
• Then tighten the lower straps from behind.