85
Bosch manual
English –
6
Code
Cause
Corrective measures
540
Temperature error
The eBike is outside of the permissible temperature range. Switch
off the eBike system and allow the drive unit to either cool down or
heat up to the permissible temperature range. Restart the system.
If the problem persists, contact your Bosch eBike dealer.
550
An impermissible load has been detected. Remove the load. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
580
Software version error
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
591
Authentication error
Switch off the eBike system. Remove the battery pack and reinsert
it. Restart the system. If the problem persists, contact your Bosch
eBike dealer.
592
Incompatible component
Use a compatible display. If the problem persists, contact your
Bosch eBike dealer.
593
Configuration error
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
595, 596
Communication error
Check the wiring to the drive and restart the system. If the problem
persists, contact your Bosch eBike dealer.
602
Internal battery fault
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
603
Internal battery fault
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
605
Battery temperature error
The battery is outside of the permissible temperature range.
Switch off the eBike system and allow the battery to either cool
down or heat up to the permissible temperature range. Restart the
system. If the problem persists, contact your Bosch eBike dealer.
606
External battery fault
Check the wiring. Restart the system. If the problem persists, con-
tact your Bosch eBike dealer.
610
Battery voltage error
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
620
Charger fault
Replace the charger. Contact your Bosch eBike dealer.
640
Internal battery fault
Restart the system. If the problem persists, contact your Bosch
eBike dealer.
655
Multiple battery faults
Switch off the eBike system. Remove the battery pack and reinsert
it. Restart the system. If the problem persists, contact your Bosch
eBike dealer.
656
Software version error
Contact your Bosch eBike dealer so that they can perform a
software update.
7xx
Error relating to third-party components
Observe the information in the operating instructions of the re-
spective component manufacturer.
800
Internal ABS fault
Contact your Bosch eBike dealer.
810
Implausible signals from the wheel speed
sensor
Contact your Bosch eBike dealer.
820
Fault in the wire to the front wheel speed
sensor
Contact your Bosch eBike dealer.
821 to 826 Implausible signals from the front wheel
speed sensor
The sensor disc may be missing, defective
or fitted incorrectly; there is a significant
difference in diameter between the front
wheel and the rear wheel; extreme riding
Restart the system and carry out a test ride lasting at least two
minutes. The ABS indicator light must go out. If the problem per-
sists, contact your Bosch eBike dealer.
1 207 020 XBP | (11.03.2020)
Bosch eBike Systems
Summary of Contents for SD3 Urban
