114
•
You can feel the shift cable clearance by gently
pulling on the end caps of the gear cables that
run into the twist grip.
•
A clearance of 0.5 mm per pull is ideal. More
than 2 mm clearance can adversely affect the
gear shift quality of the system and the service
life of the shift cable.
0,5 mm
•
To adjust this, turn both set screws and check the amended clearance
6.8. Brakes
As it is a hydraulic braking system, your maintenance options are limited. Work on
the hydraulics should be carried out by a bicycle repair shop.
6.8.1. Brake pad and brake disc wear
Brake pads and brake discs are subject to functional wear caused by friction between
the two parts. The wear depends on the riding style, terrain, weather and ground
conditions, meaning that no binding information can be given regarding the brake pads.
Brake discs need to be replaced after approx. 4 to 5 changes of brake pad pairs,
as they are made of a harder material. It is recommended to check the brake pads
every 500 km.
6.8.2. Checking the brake pads
The brake pads must be replaced when they
•
are only 2.5 mm thick (height of carrier plate and friction lining)
•
come into contact with oil (leads to low braking power)
To check the brake pad thickness, use the yellow transport lock supplied:
Maintenance
Summary of Contents for SD3 Urban
