70
Commissioning
1.4. Use of a trailer or child seat
Due to the large number of available trailer / child seats, HNF-NICOLAI can not give
general approval. Consult with HNF-NICOLAI or a qualified dealer to check the com
-
patibility of the trailer / child seat with the Pedelec.
Depending on the type of trailer, the tire pressure of the rear wheel may
need to be increased. Remove the loaded trailer from the connection point
to the pedelec and hold it at the level of the connection point with your
hand. If you feel weight on your hand, you should increase the tire pressure
of the rear wheel.
When using a child seat, increase the air pressure in the wheel, above
which the child seat is located.
2.
Commissioning
This chapter explains how to get your SD3 Urban ready for the road.
First, you should inflate the tyres. The recommended air pressure can be found in
section 3.1.
If your SD3 Urban has been delivered fully assembled, sections 2.1 and 2.2 do not
apply.
2.1.
Mounting the pedals
The right pedal has a right-hand thread and the left pedal has a left-hand
thread on the pedal axle. The right pedal is screwed clockwise and the left
pedal is screwed anticlockwise.
For installation, proceed as follows:
•
Grease the thread of the pedal axle and the crank sparingly. First screw the pedal
in loosely by hand. If this does not work, try screwing in the second pedal.
•
Tighten the pedal to 30 to 35 Newton meters with a suitable Allen wrench.
Summary of Contents for SD3 Urban
