13-13
Axle Oil Cooler
OTHER ATTACHMENTS
Check Axle Oil Level
--- every 250 hours
1. Park the machine following the same procedures as
described on page 7-8 for preparation of inspection/
maintenance work. Run the engine at slow idle speed for
several minutes, then stop the engine.
2. Install articulation lock bar (1) to the front and rear of the
frame by following the procedures described on page
7-10.
3. Clean the vicinity of oil level plug (2).
4. Remove oil level plug (2). Clean the tip of dipstick (3)
connected to oil level plug (2) with a clean cloth.
5. Make the plug lower surface contact to the axle seat
face. Oil level must be between marks H and L (4) on the
dipstick (3).
If necessary, add oil.
M4GB-07-039
3
4
Specified
Oil Level
Front Axle
Rear Axle
MNFA-07-001
2
M4GB-07-037
2
M4GB-07-038
Summary of Contents for ZW 310-6
