manualshive.com logo in svg

Hitachi ZW 310-6, Operator'S Manual

The Operator's Manual for the Hitachi ZW 310-6 is now available for free download at manualshive.com. This comprehensive manual provides detailed instructions on operating and maintaining the ZW 310-6, ensuring optimum performance and longevity. Get your copy today and unleash the full potential of this remarkable product.

Share
Download
background image

MAINTENANCE

7-106

Check Gas Pressure in Accumulator
--- every 2000 hours

Check the gas pressure at a regular interval. If the machine 

is operated with the gas pressure lower than specified value, 

normal brake operation and/or loading operation may not be 

achieved, possibly creating very hazardous situations. Ask your 

nearest Hitachi dealer for checking.

Check Brake Disks (Service and Parking)
--- every 2000 hours

Service brake (1) is a closed wet type brake. 

Parking brake (2) is a closed wet type disk brake. Parking brake 

(2) is mounted in the transmission. 

Consult your nearest Hitachi dealer for checking.

90Z7-7-82-1

90Z7-7-82-2

Summary of Contents for ZW 310-6



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZW 310-6

Kubota LA1153 Workshop Manual preview
LA1153
Brand: Kubota Pages: 122

Brands by name

Popular brands

Load more brands