OPERATING MACHINE
5-2
f
NOTE:
1. Further pull lift arm control lever (1) from "Raise" position
(A), the lever is held in the position (F) until the lift arm moves
to the position preset by the lift arm kickout. When the lift
arm moves the preset position, lift arm control lever (1)
automatically moves to the Hold (N) position.
2. Further turn bucket control lever (2) from "Tilt" position (D)
after bucket dump operation, the lever is held in the position
(G) until the bucket moves to the position preset by the bucket
auto leveler. When the bucket moves to the preset position,
bucket control lever (2) automatically moves to the Hold (N)
position.
3. When pushing down lift arm control lever (1) to the "Float"
position (C), the lift arm moves to the position preset by lift
arm auto-leveler system and is held in the position. When the
lift arm moves to the preset position, lift arm control lever (1)
automatically moves to the "Hold" (N) position. (Machine is
equipped with the lift arm auto-leveler system)
f
NOTE: When operating the machine in Float (C) position,
first hold the lift arm at the float position; then further tilt
the lever to the Float position, and lower the lift arm on the
ground.
M4GB-01-073
2
1
MNEC-03-003
C
B
E
N
N
A
F
G
D
Summary of Contents for ZW 310-6
