manualshive.com logo in svg

Hitachi ZW 310-6, Operator'S Manual

The Operator's Manual for the Hitachi ZW 310-6 is now available for free download at manualshive.com. This comprehensive manual provides detailed instructions on operating and maintaining the ZW 310-6, ensuring optimum performance and longevity. Get your copy today and unleash the full potential of this remarkable product.

Share
Download
background image

OPERATOR'S STATION

1-169

Battery Disconnect Switch

IMPORTANT:  Never turn the disconnect switch OFF 

while the engine is running or the key switch is in the 

position other than OFF. Failure to do so may damage 

the electrical system. 

The battery disconnect switch is different from the engine 

start key switch. When the battery disconnect switch is turned 

OFF, the electrical system will completely be isolated from 

the battery. No current will flow through the whole electrical 

system. 

Before turning the battery disconnect switch OFF, be sure 

to turn key switch OFF and wait 5 minutes or more after 

the engine stops. If the battery disconnect switch is turned 

OFF within 5 minutes after the engine stops, it may result in 

malfunction of the electrical system. When turning the battery 

disconnect switch from OFF to ON, preset radio station and 

the clock may be reset. Set them again. 

Use the battery disconnect switch only for the following 

purposes; otherwise, turn it ON. 

  Before maintaining and repairing the electrical system

  Before storing the machine for long period (Discharge 

prevention)

  Before performing welding operation on the machine.

  Before replacing the batteries. 

BatterySW3

Summary of Contents for ZW 310-6



























































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ZW 310-6

jcb 411HT Service Manual preview
411HT
Brand: jcb Pages: 51

Brands by name

Popular brands

Load more brands