Hitachi Zaxis 33U-5A Operator'S Manual Download

Page: 78 / 340

OPERATOR'S STATION

1-12



Overload Alarm Selector (Optional) (12)

This selector is displayed when the machine is equipped

with the overload alarm device. Push selector (12) to turn
the overload alarm ON/OFF.

Overload Alarm "OFF"

Overload Alarm "ON"



Auto-Idle Switch (14)

When the auto-idle switch is turned ON, the indicator
displays ON and the function is enabled.



Travel Mode Indicator (16)

The travel mode selected by the travel mode switch located
on the end of the blade lever is displayed.



Work Light Indicator (17)

The indicator is displayed while the work light switch on the
switch panel is turned ON and the work lights on the front

side of the boom and the canopy are lit.

MADC-01-010

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands