Hitachi Zaxis 33U-5A Operator'S Manual Download

Page: 177 / 340

MAINTENANCE

7-9

Tank Cover

WARNING:



Do not keep the access covers open when the

machine is parked on a slope, or while the wind
is blowing hard. The access covers may close
accidentally, possibly resulting in personal injury.



When opening or closing the access covers, take

extra care not to catch fingers between the base
machine and the access covers.

1. Press button (2) and raise cover (1) to open cover (1).

2. Raise cover (1) until stopper (3) fits into the lock position

on bracket (4).

3. Confirm that stopper (3) is in the LOCK position before

releasing your hands.

CAUTION: When closing cover (1), confirm that cover

(1) is securely locked.

4. When closing cover (1), push stopper (3) while raising

cover (1) by hand.

5. Lower cover (1) while pushing stopper (3). Release

stopper (3) when cover (1) is lowered by 1/4 of its

movable distance.

NOTE: Button (2) can be locked with the key.

MADB-07-005

MADB-07-006

MADB-07-004

MADB-07-007

Unlock

Position

Unlock

Position

Lock

Position

Lock

Position

ZX33U-5A, 38U-5A

ZX48U-5A, 55U-5A, 65USB-5A

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands