Hitachi Zaxis 33U-5A Operator'S Manual Download Page 178

Page: 178 / 340

MAINTENANCE

7-10

Radiator front Cover

WARNING:



Do not keep the access covers open when the

machine is parked on a slope, or while the wind
is blowing hard. The access covers may close
accidentally, possibly resulting in personal injury.



When opening or closing the access covers, take

extra care not to catch fingers between the base
machine and the access covers.

Open the radiator front cover until rod (1) fits into the lock

position on rail groove (2).

Raise rod (1) to release lock before closing the radiator front

cover.

MADB-07-022

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands