Hitachi Zaxis 33U-5A Operator'S Manual Download

Page: 30 / 340

Keep Person Clear from Working Area



A person around the operating machine may be hit severely

by the swinging front attachment or counterweight, be

caught in other objects, and/or be struck by flying objects,

resulting in serious injury or death.



Set up barriers and/or put a NO ADMISSION sign at the

machine operating site and areas exposed by flying
objects to prevent anyone from entering the work area.



Check that all personnel or obstacles other than the

signal person are not present in the working area before

operating the machine.

Never Position Bucket Over Anyone



Never lift, move, or swing bucket above anyone or a truck

cab.

Serious injury or machine damage may result due to bucket
load spill or due to collision with the bucket.

SAFETY

S-18

SA-667

SA-668

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands