Hitachi Zaxis 33U-5A Operator'S Manual Download Page 309

Page: 309 / 340

13-7

ATTACHMENT PEDAL (HYDRAULIC BREAKER)

OPTIONAL ATTACHMENT

Operate the chisel carefully to avoid hitting the
machine.

When the arm rolled in with the breaker equipped, the

chisel may come in contact with the boom.

Do not operate breaker with the arm positioned
vertically.

Excessive vibration to the arm cylinder will occur, causing oil
leakage.

Press the breaker so that the chisel (the axis) is
positioned and thrust perpendicular to the object.

Failure to do so may damage the chisel or may cause seized
piston.

Do not operate the breaker continuously longer than
one minute.

Failure to do so may result in premature wear of the chisel.

If an object could not be broken within one minute, apply

the chisel to other locations, less than one minute for each
location.

Watch Out!

Take care

not to hit the

boom with

the crusher

If an object could not

be broken within one

minute, apply the chisel

to other locations.

M147-05-015

M1M7-05-023

MZX5-13-006

MZX5-13-007

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands