Hitachi Zaxis 33U-5A Operator'S Manual Download

Page: 112 / 340

OPERATOR'S STATION

1-46

Seat Belt

WARNING:



Be sure to use seat belt (1) when operating the

machine.



Before operating the machine, be sure to examine

seat belt (1) and the hardware attached for any
failure. Replace the seat belt and the hardware
attached if they are dameged and/ or worn.



Replace seat belt (1) every 3 years regardless of its

appearance.

Seat Belt

1. Confirm that seat belt (1) is not twisted. Securely insert

the end of seat belt (1) into buckle (2). Lightly pull on the
belt to confirm that the buckle latches securely.

2. Push button (3) on buckle (2) to unfasten seat belt (1).

Replace the seat belt if it is damaged or worn out, or if the
seat belt has external damage due to accident.

Room Lamp (Cab equipped machine)

Push switch (4) on the cab light to turn the cab light ON. (The
light turns ON while the key switch is ON.)

M573-01-014

M107-01-045

M573-01-015

M1M7-01-021

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands