Hitachi Zaxis 33U-5A Operator'S Manual Download

Page: 106 / 340

OPERATOR'S STATION

1-40

Tuning Procedure

1. Manual Tuning Procedure

Push UP

button (3) to increase the frequency by

one step. Push DOWN

button (3) to decrease the

frequency by one step.

2. Automatic Tuning (Auto-Seeking)

Push UP

button (3) or DOWN

button (3) long to

scan the frequency upward or downward. When a station
is received, the auto-seeking function is deactivated so

that the received frequency station is tuned in.

Station Presetting Procedure

1. Select MW (AM) or FM by pushing AM/FM switch (5).

2. Push one of PRESET buttons (7) long to save the

receiving frequency in memory. When the preset
procedure completes, the PRESET button No. flashes 3
times and frequency display becomes ON.

3. Repeat steps 1 and 2 for other PRESET buttons (7).



Station Auto-Presetting Procedure

Pushing SOUND control switch (2) long with the radio
switch ON will search for the optimum receiving radio

frequency stations and automatically allocate each station

in preset memory buttons (1 to 6).

NOTE: Performing auto-presetting operation will delete the

stations previously saved in memory.

If it is difficult to set the memory of the desired station to the
desired button, follow the preset procedure.

Deletion of Preset Memory

If the battery power is disconnected while servicing the
machine or by removing the radio, the preset memory in

PRESET buttons (7) will be deleted. In this case, preset the

stations again.

M1NE-01-003

Summary of Contents for Zaxis 33U-5A





















































































































































































































































































































































Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands

Hitachi Zaxis 33U-5A, Operator'S Manual

Search results

Summary of Contents for Zaxis 33U-5A

Reviews:

Related manuals for Zaxis 33U-5A

Brands by name

Popular brands