Hitachi SVP F 00 Series Manual Download Page 78

Page: 78 / 275

■

File and Printer Sharing (Echo Request - ICMPv6-In) (Profile=Domain)

■

File and Printer Sharing (Echo Request - ICMPv6-In) (Profile=Private)

Note: After enabling ICMP (ping) reply, change the computer name.

Changing the computer name

Changing the computer name allows the SVP to be identified easily.

Procedure

1. Click Control Panel > System, and then click Change settings under Computer

name, domain, and workgroup settings.

2. In the System Properties window, click the Computer Name tab, and then click

Change.

Changing the computer name

Chapter 5: Installing the SVP software on a customer-supplied server

Service Processor Technical Reference

Summary of Contents for SVP F 00 Series




















































































































































































































































































Search results

Summary of Contents for SVP F 00 Series

Reviews:

Related manuals for SVP F 00 Series

Brands by name

Popular brands

Hitachi SVP F 00 Series, Manual

Search results

Summary of Contents for SVP F 00 Series

Reviews:

Related manuals for SVP F 00 Series

Brands by name

Popular brands