background image

Chapter

 

2:

 

 Physical SVP (Windows 7) hardware

description

The physical SVP with Windows 7 operating system is provided by Hitachi Vantara. The

physical SVP is a 1U management server that attaches to each VSP disk controller (DKC).

The following sections describe the front and rear panels of the Hitachi Vantara-supplied

physical SVP, along with the physical, electrical, and environmental specifications.

SVP front panel

The front panel of the physical SVP is equipped with LEDs, a reset button, and a power

button.

Table 3 SVP (Windows 7) front panel

Item

Description

1

LEDs. From left to right, the LEDs are:

BMC Heartbeat

LAN card 2

LAN card 1

Hard drive

System standby power

2

Reset button.

3

Power button. Applies power to or

removes power from the SVP.

Chapter 2: Physical SVP (Windows 7) hardware description

Service Processor Technical Reference

17

Summary of Contents for SVP F 00 Series




















































































































































































































































































Reviews: