Hitachi SVP F 00 Series Manual Download Page 246

Page: 246 / 275

18. Click OK.
19. Wait for the firmware upgrade to complete, and then verify the firmware update

status in the Firmware (Storage System) column of the Environmental Settings

window. Wait for the firmware update to complete. The following table lists the

status conditions.

Status

Description

(Select Update)

Click Update to display the Update

Firmware window.

In progress

The Update Firmware window started

and the firmware upgrade is not

complete. This status appears even if

the firmware upgrade is canceled.

Completed

Firmware upgrade is complete.

Failed

Firmware upgrade failed. Click Update

to display the Update Firmware

window, and review the error details.

Communication Timeout

The time

required to complete the

firmware upgrade cannot be confirmed.

Verify the state in the Update

Firmware window.

(Not Update)

Not selected as a firmware upgrade

target.

Note:
1. When NAS Modules are not installed, the installation time is approximately 3.5

hours. When NAS modules are installed, the installation time is approximately 9

hours.

20. When the firmware upgrade completes, click Close.

Registering the storage system on the SVP

Chapter 16: Deleting and registering the storage system

Service Processor Technical Reference

246

Summary of Contents for SVP F 00 Series




















































































































































































































































































Search results

Summary of Contents for SVP F 00 Series

Reviews:

Related manuals for SVP F 00 Series

Brands by name

Popular brands

Hitachi SVP F 00 Series, Manual

Search results

Summary of Contents for SVP F 00 Series

Reviews:

Related manuals for SVP F 00 Series

Brands by name

Popular brands