ENGLISH
8
(06) Button Input Test
Press the nine buttons one-by-one. The number indicated
with “
A
” counts up as buttons are being pressed.
* The order of pressing buttons is random.
Do not press more than one button at a time. It is not be
counted.
0 6 : 0 0 0
Self Checking
A
9
(07) No Function
This function is not used.
Press “OK” to proceed.
10
(08) Communication (Transmission) Circuit Test
The wired controller automatically starts to check the
communication circuit.
0 7 : 0 0 0
Self Checking
07: No Function
08: Transmission Test
11
(09) Wired Controller Thermistor Test
The detected temperature by the wired controller thermistor
is displayed at “
A
” in the figure at the right.
0 9 : 0 2 5
Self Checking
A
12
(10) Date/Time Test
The date and time is changed from “2012.03.04 12:34” to
“2008.01.01 00:00”.
1 0 : 0 0 0
2008.01.01 00:00
Self Checking
13
(11) EEPROM Test
-
EEPROM Clearing Cancel
Press “
?
/
” (return / help).
-
EEPROM Clear
Press “OK” or wait 15 seconds. EEPROM data is
cleared. During the process, the numbers is indicated the
location with “
A
”.
-
If
A
has a value of “999”, EEPROM is in a faulty
condition.
If
A
has “999”, the process does not proceed to the next
step.
11 : 0 0 0
Self Checking
A
14
(13) Clear EEPROM
The wired controller automatically starts the EEPROM
clearing process.
1 3 : 0 0 0
Self Checking
15
After several seconds pass, the self checking is completed
and the wired controller is automatically restarted.
CHECK MENU
PMML0496 rev.1 - 12/2020
39
