ENGLISH
3 START UP PROCESS
1
Turn ON the power supply for all the indoor units.
2
For the models with the auto-address function, wait for 3
minutes approximately. The addressing is automatically
performed. (There are cases in which 5 minutes may be
required depending on setting conditions.) After that, press “
” (menu) and select using language from
“8.19.2 Language
Setting”
in
“8.19 Screen display setting”
menu.
4 OPERATION METHOD
4.1 OPERATION START
Press “
” (run/stop). The run indicator will be turned on and the
operation will be started.
A/C
MODE
SPEED
LOUV.
TEMP
COOL
Meeting Room
MODE
Adj.
LOUV.
OK
?
N O T E
Temperature / Air Flow Setting: The setting condition will be memorized
once after the setting is confirmed, therefore the daily setting is not
required.
4.2 OPERATION STOP
Press “
” (run/stop) again. The run indicator will be turned off
and the operation will be stopped.
A/C
MODE
Adj.
TEMP
MODE
SPEED
TEMP
COOL
Meeting Room
OK
?
N O T E
The indoor unit fan may continue to operate for up to two minutes following
the heating cycle to dissipate residual heat from the indoor unit.
4.3 BASIC OPERATION
1
Item Selection.
By pressing “ ”or “ ”, the icon “
” will move to the next
item in order of the indications “MODE”, “SPEED”, “LOUV.”
and “TEMP”.
A/C
MODE
SPEED
LOUV.
TEMP
COOL
Meeting Room
MODE
Adj.
LOUV.
OK
?
/
2
Change of Settings
With the item (“MODE”, “SPEED”, “LOUV” or “TEMP”)
selected, press “ ” or “
”. The setting will be changed.
A/C
MODE
SPEED LOUV.
TEMP
HEAT
SPEED
Adj.
Meeting Room
OK
?
/
START UP PROCESS
PMML0496 rev.1 - 12/2020
3
