ENGLISH
troubleshooting. Consult to authorized service engineers if
abnormality can not be recovered.
•
Small sound may be heard from the outdoor unit after turning
ON the power source because the electrical expansion valve
is activated to adjust the opening. Therefore there is no
abnormality of the unit.
•
Sound may be heard from the outdoor unit for seconds after
running or stopping the compressor, starting or finishing
the defrosting, etc. It generates because of the pressure
difference inside the piping from the compressor. Therefore,
there is no abnormality of the unit.
Sel.
MODEL :E .00
Alarm Code:
13
00-00
AlarmRst
Address
Entr
OK
Refrigerant cycle number
of indoor unit which
abnormality occurs
Total number of
indoor unit in same
refrigerant cycle as
one that abnormality
occurs
Indoor unit number
which abnormality
occurs
Unit model
code
Alarm code
number
6.2 FUNCTION SELECTION
1
Press and hold “ ” (menu) and “
?
/
” (return / help)
simultaneously for at least 3 seconds during the normal
mode (when unit is not operated). The test run menu is
displayed then.
2
Select “Function Selection” from the test run menu and press
“OK”.
ADJ
/
OK
Test Run Menu
Test Run
Function Selection
Thermistor Selection
Input/Output
Function 5
01
03
Entr
Rtrn
Sel.
3
Select the indoor unit by pressing “
” and press “OK”.
(This screen is NOT displayed when the number of indoor
units connected with the remote control switch is 1. In this
case, go directly to the step 4).
OK
Function Selection
All
01-01
01-02
01-03
01-04
Entr
Rtrn
Sel.
4
Press “ ” and select the item.
OK
Function Selection:01-03
01
31
b1
b2
b3
b4
b5
Item
/
Adj.
Entr
Rtrn
Sel.
Setting
00
00
00
00
00
5
Press “ ” and change the setting.
OK
Function Selection:01-03
01
31
b1
b2
b3
b4
b5
Item
/
Adj.
Entr
Rtrn
Sel.
Setting
00
00
00
00
00
6
Press “OK”, then the confirmation screen is displayed.
7
Select “Yes” and press “OK”. The test run menu is displayed
after the setting is confirmed. If “No” is pressed, the screen
returns to step 4.
OK
Confirm function selection
setting?
Function Selection:01-03
Yes
No
Sel.
Entr
Rtrn
8
Press “
?
/
” (return / help) on the test run menu to return to
the normal mode.
?
N O T E
To set other units, press “
?
/
” (return / help) at steps 4 and 5 so that
the screen returns to step 3 (If the number of indoor units connected
with the remote control switch is 1, the screen returns to step 4).
TEST RUN MENU
PMML0496 rev.1 - 12/2020
9