GS4000 Installation Guide Revision 4.00
520-10-026-30X
1-57
(7) NE1GSHP-4S
The NE1GSHP
-
4S is a Network Interface providing 4 Ethernet ports (1000BASE
-
SX/1000BASE
-
LX). The hierarchical shaper function is pre-installed.
*
NOTE: SFP is required when using NE1GSHP-4S. See the section 1.8 “GBIC, SFP,
XFP” for information about SFP.
Front View
The LED indicators are listed in Table 1.6-8
Figure 1.6-8 Front Panel of NE1GSHP-4S
LEDs
Table 1.6-8 LED Indications on the NE1GSHP-4S Front Panel
Name Color
Role
Action
Status
STATUS Green/Yellow/Red
Shows the action status of
NIF.
Green (ON): operation possible.
Yellow (ON): locked out
Green (blinking)
：
in preparation for startup
Red (ON)
：
failure detected
OFF
：
NIF powered off
（
NIF exchangeable
）
G: LINK 0~3
Y: LINE ERR
0~3
Green/Yellow
Shows the action status of an
interface line.
Green (ON)
：
link established
Green (blinking)
：
link established or frames being
sent/received
Yellow (ON)
：
failure detected
OFF
：
When STATUS LED is green (ON);
--link failure, locked out
U
S2 Green
U
S3 Green
D
S2 Green
D
S3 Green
Shows the processing status of packets (for hardware debugging).
Ethernet Port
LEDs
