GS4000 Installation Guide Revision 4.00
520-10-026-30X
xvi
•
Do not hold the area marked with
in the figure
at right when mounting or removing a PRU from the
GR4000 or a PSU from the GS4000. Doing so could
damage the outer frame of the PRU or PSU, and a NIF
could be damaged if you try to insert it into a PRU or
PSU with a damaged outer frame.
•
Do not place the device in direct sunlight or near
other heat sources that may cause damage.
•
If the device is placed near a radio or TV, they might affect each other in an unfavorable
way. If you hear the burst of noise on a TV or a radio, do the following:
1. Place the device as far away from a TV or a radio as possible.
2. Adjust the antenna of a TV or a radio to another direction.
3. Use a different AC outlet for a TV or radio from that used for the GR4000 or GS4000.
•
Clean the device only with a clean, dry cloth, or use a cloth that has been dampened
(not wet) with water or another pH-neutral liquid. Do not use volatile organic solutions
such as benzene or paint thinner, chemicals, chemically treated cloths or pesticides,
since these substances may deform, discolor or damage the device.
•
Unplug the power cable from the outlet when the device is not used for long periods. If
you are using the DC power supply, switch off the circuit breaker at the power facility.
•
Always dispose of exhausted devices or boards in an environmentally responsible
manner and as required by your local regulations. The GR4000 or GS4000 contains
lithium batteries, circuit boards containing copper, lead and tin, cables and connectors,
all of which can be recycled.
•
Do not install optional components for the GR4000 or GS4000 on devices other than
the GR4000 or GS4000. Doing so could cause a fire or an electric shock.
•
The GR4000-80E2, GR4000-160E2, GS4000-80E2, and GS4000-160E2 must be
installed in a restricted-access location. This location should ensure that access to the
device can be gained only by service personnel through the use of a special tool, lock
and key, or other means of security, and is controlled by the authority responsible.
