E3 - 15
ERROR MESSAGE
COUNTERMEASURE
ERROR OCCURRED. IRIS TROUBLE
Make sure of the connection (PG1301) between lens and ANA
PRESS ANY KEY
circuit board.
Check whether or not power is supplied.
Check the ANA circuit board and replace it if necessary.
Check the lens and replace it if necessary.
ERROR OCCURRED ON da× ADJUSTMENT
Make sure of the connection (PG1301) between lens and ANA
PRESS ANY KEY
circuit board.
Check the ANA circuit board and replace it if necessary.
D RANGE OVER. ERROR ON da× ADJUSTMENT
Make sure of the connection (PG1301) between lens and ANA
PRESS ANY KEY
circuit board.
Check the ANA circuit board and replace it if necessary.
ERROR OCCURRED ON da0 and
Make sure of the connection (PG1301) between lens and ANA
da1 ADJUSTMENT
circuit board.
PRESS ANY KEY
Check the ANA circuit board and replace it if necessary.
FILE NOT FOUND !!!!
The adjustment program (file) cannot be found.
PRESS ANY KEY
Check the adjustment floppy disk and replace it if necessary.
FILE OPEN ERROR !!!!
The adjustment program (file) does not start.
PRESS ANY KEY
Check the adjustment floppy disk and replace it if necessary.
ERROR OCCURRED ON C DUTY ADJUSTMENT
Check the ANA circuit board and replace it if necessary.
PRESS ANY KEY
ERROR OCCURRED ON FDET ADJUSTMENT
Supply power again and re-adjust.
PRESS ANY KEY
Check the ANA circuit board and replace it if necessary.
ERROR OCCURRED. ZOOM DOES NOT WORK
Supply power again and re-adjust.
PRESS ANY KEY
TOO BRIGHT
The subject is too bright.
PRESS ANY KEY
Move the camera further away from the light box.
TOO DARK
The subject is too dark.
PRESS ANY KEY
Check the light box.
Move the camera closer to the light box.
Make sure of the connection between SE and ANA circuit boards.
Check the lens and replace it if necessary.
D RANGE OVER ERROR ON HALL AMP
Supply power again and re-adjust.
IRIS CANNOT OPEN ANY MORE
The subject is too dark.
PRESS ANY KEY
Check the light box.
Move the camera closer to the light box.
Check the ANA circuit board and replace it if necessary.
Make sure of the connection (PG1301) between lens and ANA
circuit board.
Check the lens and replace it if necessary.
STAURATION ERROR. TOO BRIGHT
The subject is too bright.
PRESS ANY KEY
Move the camera further away from the light box.
CAN'T ADJUST WHITE BALANCE
The subject is too bright or too dark.
PLEASE RETRY
Check the light box.
PRESS ANY KEY
Move the camera closer to or away from the light box.
Supply power again and re-adjust.
6.1
Error Message of Adjustment
6. ERROR MESSAGE
A message may appear while you are adjusting the video camera/recorder. If a message appears, refer to the following table
and take appropriate corrective action.
