E1 - 9
Message
Control info. error
Disc error
No more scenes
Play List was deleted
Write protected
Check cartridge
Battery is low
Please charge battery
Cannot combine
Select multiple
scenes
Cannot combine
Deselect stills
Scenes over limit
Cannot divide
Scenes over limit
Cannot add scenes
Cause
Mismatch may occur
between the recorded
image and scene infor
mation.
Disc may be dirty.
Mismatch in recording
information may be caused
by editing done on some
device other than this DVD
video camera/recorder.
Disc may be dirty.
All scenes are unloaded
from the play list.
-----
-----
-----
-----
The number of entered
scenes has reached the
limit that can be entered.
The number of scenes
entered in play list has
reached the limit that can
be entered.
Troubleshooting
Update the control information.
Remove the disc and wipe off
fingerprints, dust, etc. before
reusing it, or use another disc.
Initialize the disc or use
another disc.
Remove the disc and wipe off
fingerprints, dust, etc. before
reusing it, or use another disc.
-----
Release write-protect of
cartridge.
Replace with a charged
battery.
Select a range of at least 2
scenes to be combined, and
then combine them.
Select only movies and
combine them.
Delete (unload) several
scenes.
Unload several scenes.
Technical explanation
This appears when editing,
etc. was performed near the
limit (999 scenes or 13MB) of
media on devices other than
this DVD video camera/
recorder, or on user operated
control files. (*1)
The message appears when
reading recorded files or
writing data to files is not
possible. If the message still
appears after the disc is
replaced with normal one,
there is a problem in the DVD
video camera/recorder.
This appears when user is
operating information (control)
files.
The message appears when
reading recorded files or
writing data to files is not
possible. If the message still
appears after the disc is
replaced with normal one,
there will be nay problem in
the DVD video camera/
recorder.
If all scenes have been
removed from play list on the
play list select or editing
screen, the play list will
automatically be deleted, and
then this message will appear.
This appears with write
protected disc when some
writing to disc, such as
addition, deletion of scenes,
etc., is to be executed.
If the battery remaining level is
the same as the indication of
battery mark blinking during
editing, this message will
appear and editing will not be
possible.
This is an issue on operation.
This appears when stills are to
be combined and the still
combining function is not
installed.
This appears if scene is to be
divided (increased) when the
number of scenes has reached
the upper limit of 999. (*1)
This appears when the
number of scenes has reached
999 and scenes are still to be
added to play list. (*1)
Faulty or
not
Error on
disc
Same as
above
Same as
above
Same as
above
None
None
None
None
None
None
None
4.
Explanation of Trouble Messages
A message may appear while you are operating the DVD video camera/recorder. If a message appears, refer to the following
table and take appropriate corrective action.
