Hitachi CBL, Hardware Service Manual

Page: 217 / 292

Upgrading a Hitachi Unified Storage 130 system
15–5
Hitachi Unified Storage Hardware Service Guide
Unpacking the CBL and Drive Box
Drives cannot be installed in a CBL Controller Box. Therefore, during this
upgrade:
• drives installed in a CBSL enclosure rotate to a DBL Drive Box.
• Drives installed in a CBSS enclosure rotate to a DBS Drive Box.
After receiving the CBL and Drive Box, perform the following steps to ensure
that your contents arrived safely.
If the CBL and Drive Box arrived in cold weather, do not unpack them until
they come to room temperature (one to two hours). Immediately exposing
them to warm temperature could cause condensation to occur, which could
damage the electronics. If you notice any condensation, allow the CBL and
Drive Box to stand unattended for one to two hours and then unpack them.
1. Inspect all shipping cartons for signs of damage. If you spot damage,
contact the shipper.
2. Loosen the band around the cartons and open all cartons.
3. Compare the items received to the packing list. If an item is missing or
damaged, contact your place of purchase.
4. Remove all packing materials, envelopes, and boxes from the cartons.
Your carton should include an accessory box located under the packed
storage system with rail kits for rack-mounting the storage system
5. Open and remove the bag in which the CBL and Drive Box are enclosed.
6. Confirm that the items and quantity of items received match the
hardware required by the customer.
7. Keep all packing materials and cartons in case you need to transport or
ship the CBL and Drive Box.
8. Keep the key supplied with the storage system in a safe place. The key
for the front bezel is used to mount and dismount the CBSL/CBSS/DBL/
DBS front bezel.
Due to the weight of the hardware, unpacking should be done by two or
more persons. Approximate weights are:
• CBSL = 94.8 pound (43 kg)
• CBSS = 88 pounds (40 kg)
• CBL = 103.6 pounds (47 kg)
• DBL = 59.5 pounds (27 kg)
• DBS = 50.7 pounds (23 kg)
• DBX = 187.3 (85 kg)