Hitachi CBL, Hardware Service Manual

Page: 10 / 292

x
Hitachi Unified Storage Hardware Service Guide
The array complies with FDA radiation performance standards 21CFR
subchapter J.
EMI regulation
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference in which case the user will be required to correct the
interference at his own expense. Testing was done with shielded
cables. Therefore, in order to comply with the FCC regulations, you
must use shielded cables with you installation.
The EMI test was done in the following configuration.
If trouble occurs in another configuration, a user may be requested
to take appropriate preventive measures.
• DF850-CBXSS/CBXSL+DBS/DBL(x2)+RK40
• DF850-CBSS+DBS/DBL(x4)+RK40
• DF850-CBL+ DBS/DBL(x4)+RK40
• DF850-CBSS/CBSL+ DBS/DBL(x4)+DBX(x2)+RK40
• DF850-CBL+ DBW(x4)+RK40
• DF850-CBLD+ DBSD/DBLD(x4)+RK40
This product must not be used in residential areas.
This is a class A product. In a domestic environment this product may
cause radio interference in which case the user may be required to
take adequate measures.