Hitachi 46W500, Training

Page: 147 / 162

DP-3X THINGS YOUR SHOULD KNOW
PAGE 10- 13
Figure 1 shows the location of the Model and Serial Number tag.
This can be seen without moving the set or requiring any disassembly.
Figure 3 shows the actual location of the Model and
Serial Number tag. This can be seen without moving
the set or requiring any disassembly.
This picture is actually of an LCD Projection set, but
the location is the same for all classes of PTVs.
Figure 2 shows the a Close Up of the
Model and Serial Number tag.
(16) Using DVI and a Cable Box, some HD signals give an Error Message:
ERROR NOTICE:
DVI Interface with some Cable Boxes.
When selecting some HD Channels, the notice reads as follows:
"The HD content protection on your display has been compromised. Please use the Y Pb/Pr Outputs for your
HD connection". Or "Monitor Does not support HDCP" or “Lower Resolution” or “Snow”.
The warning will show up at power on and will remain there if left alone.
EXPLANATION:
"This is not a problem with the Projection Television".
With the addition of Digital transmission, many avenues of private digital data and usage privileges are being
incorporated into the transmission stream. During this age of HD infancy, these codes are being manipulated
and can generate this situation. HDCP is the issue here. Please contact your local cable operator for additional
information. A temporary work-around is to disconnect and reconnect the DVI cable between your cable box
and TV. Your patience is appreciated until this issue can be resolved by the cable operator.
NOTE: Both the
TV and the Set Top Box Must Be ON.
Figure 1
Figure 2
Figure 3
(15) The Model and Serial Number is on the
Front Right Hand Side for easy access.