Hirschmann BAT 11b, Management Manual

Page: 86 / 128

Status
86
BAT 11b
Release 1.0 03/04
• Firmware Version:
It shows the firmware status currently installed on the BAT
11b. Firmware upgrades should only be made if problems
occur with the currently used firmware or if a newer
firmware version with desired new features is available. A
firmware upgrade can be made under
How to Upgrade the
Firmware on Page 2–51 .
LAN
• MAC Address:
This is the hardware address of the BAT 11b Wireless
Ethernet.
• IP Address Mode:
DHCP or Static IP address: Specifies whether the IP
address was determined statically or assigned by a DHCP
server.
• IP Address:
The IP address is the unambiguous IP address of the BAT
11b Wireless Ethernet.
• Subnet Mask:
The subnet mask, which is also referred to as IP mask or
netmask, masks the IP address section in your network.
• Default Gateway:
Shows the IP address of your default gateway.
Wireless LAN
• Network Name:
The network name serves to logically assign clients, which
is also referred to as SSID. Only clients with the same
network name are granted access. In AC operation, no
network name is factory set. The AC will therefore try to log
on to an available access point, irrespective of its network
name. This setting is also called “ANY”.