Hirschmann BAT 11b, Management Manual

Page: 97 / 128

Configuration: LAN Interface
97
BAT 11b
Release 1.0 03/04
• Gateway
Specifies the IP address of the default gateway. As a rule,
this a router or a PC with Internet access.
• Nodename
Name of the BAT 11b Wireless Ethernet AC. Serves for easy
identification via the Hirschmann BAT Discovery. In the
state as delivered, the node name consists of “node_” and
the MAC address of the BAT 11b.
If you want to take over the settings made, confirm this by
clicking Save. Otherwise, you can discard the changes by
clicking Cancel. To take over the changes and activate them,
the BAT 11b Wireless Ethernet has to be rebooted.
You are requested to do this via the following message:
Confirm this message by clicking Reboot. You are requested
once again to terminate all existing connections and browser
sessions via a reboot. The reboot process takes a few sec-
onds; subsequently, the BAT 11b Wireless Ethernet will be
ready for operation again.
Confirm with OK. You will then have to log on again.
Hinweis:
The restart of the BAT 11b (takes about 10 seconds) is not dis-
played on your computer screen. With the help of the LEDs of
your BAT 11b, however, you can check the radio activity, the
radio status, and the Ethernet activity.