Hirschmann BAT 11b, Management Manual

Page: 60 / 128

Status
60
BAT 11b
Release 1.0 03/04
desired new features is available. A firmware upgrade can be
made under
How to Upgrade the Firmware on Page 2–51 .
LAN
• MAC Address:
This is the hardware address of the BAT 11b Workgroup.
• IP Address Mode:
DHCP or Static IP address: Specifies whether the IP address was
determined statically or assigned by a DHCP server.
• IP Address
The IP address is the unambiguous IP address of the BAT 11b
Workgroup.
• Subnet mask
The subnet mask, which is also referred to as IP mask or netmask,
masks the IP address section in your network.
• Default Gateway
Shows the IP address of your default gateway.
Wireless LAN
• Network name
The network name serves to logically assign clients, which is also
referred to as SSID. Only clients with the same network name are
granted access.
• Channel
In this field, the active channel is specified which is shared by all
devices connected to this BAT 11b Wireless Ethernet. According to
the country code, up to 13 channels are available. As the factory
setting, channel 6 is preconfigured.
• Security:
Specifies whether WEP encryption has been activated in the BAT
11b Wireless Ethernet.
Associated Clients
• Wireless clients (notebooks, desktop PCs, PDAs, etc.) can log on
to the BAT 11b Wireless Ethernet. The list of the logged-on clients
specifies the MAC addresses of the clients. The right column