Hirschmann BAT 11b, Management Manual

Page: 96 / 128

Configuration: LAN Interface
96
BAT 11b
Release 1.0 03/04
Configuration: LAN Interface
Here, you can configure the LAN parameters of the BAT 11b
Wireless Ethernet.
• IP Address Mode
Check the DHCP option to have the IP settings
automatically assigned to the BAT 11b Wireless Ethernet by
the available DHCP server. To configure the settings
statically, check the Static option and enter the values
manually. If no DHCP server is found in the network, the
BAT 11b Wireless Ethernet will take over the statically set
values.
• IP Address
Enter an unambiguous IP address of your network. This
address may be 192.168.1.15, for instance, if the network
concerned is a private network. In this case, you do not
require a commercially available address from your
Internet provider.
• Subnet Mask
The subnet mask has to be identical with the one of your
Ethernet network. By default, you can enter 255.255.255.0.