Hirschmann BAT 11b, Management Manual

Page: 49 / 128

The Basic Configuration
49
BAT 11b
Release 1.0 03/04
The Basic Configuration
1. To configure a BAT 11b, select the corresponding entry
in the main window.
2. To be able to use all functions, enter the password for
the BAT 11b (see Section Entering the Password ).
3. Select Configuration > IP-Setup or click the IP-Setup...
button in the tool bar.
Entering the Password
The password is required to use the following functions of the
BAT Discovery:
• Load firmware
• How to Restart the BAT 11b
• Factory default
• IP-Setup
To enter the password, proceed as follows:
1. Select the BAT 11b in the list and select Extras > Pass-
word.
2. Enter the password for the BAT 11b.
The factory-set password for the administrator user
level is admin.
If the Assign to all BAT 11b option is checked, the pass-