Hirschmann BAT 11b, Management Manual

Page: 81 / 128

Configuration: Administration
81
BAT 11b
Release 1.0 03/04
• Reset Configuration
Resetting the configuration makes sense if you do not wish to
reset all configuration data to factory default state.
Note: If you use the Reset Configuration option, the following
parameters will not be reset: password, IP settings, and node
name.
• Reset to Factory Default
Resets all BAT 11b Wireless Ethernet configuration data to the
factory default state.
Change Password
For security reasons, it is recommended to change the preset
passwords as soon as possible.
Enter the new password subsequently two times into the cor-
responding input fields and confirm your entries by clicking
the Save button.
The new password will become valid upon the next log-on
attempt.
Caution:
If you forget the password, it will be lost. This is because pass-
words cannot be reset to the factory defaults via Reset Confi-
guration. If you have forgotten your password, refer to Section
How to Reset the Password in the Annex on Page 122 .