Hioki PW3390, Instruction Manual

Page: 78 / 108

PW3390 Power Analyzer Communication Command Instruction Manual Second Edition
78/107
Set and Query Normal Measurement Value Communication Output Items of Respective Channels
Syntax Command :MEASure:ITEM:NORMal <Udata>,<Idata>,<Pdata>,<Sdata>,
<Qdata>,<PFdata>,<DEGdata>,<FREQdata>
Query :MEASure:ITEM:NORMal?
Response <Udata>,<Idata>,<Pdata>,<Sdata>,<Qdata>,
<PFdata>,<DEGdata>,<FREQdata>
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Udata - - - - U4 U3 U2 U1
Idata - - - - I4 I3 I2 I1
Pdata - - - - P4 P3 P2 P1
Sdata - - - - S4 S3 S2 S1
Qdata - - - - Q4 Q3 Q2 Q1
PFdata - - - - PF4 PF3 PF2 PF1
DEGdata - - - - DEG4 DEG3 DEG2 DEG1
FREQdata - - - - FREQ4 FREQ3 FREQ2 FREQ1
Description Command Sets the normal measurement value communication output items of
the various channels as 0
– 255.
Query Returns the settings for the normal measurement value communication
output items of the various channels as numerical values.
Example Command :MEAS:ITEM:NORM 1,1,1,0,0,1,0,0
Set the voltage, current, effective power, and power factor data of Channel 1
to ON.
Query :MEAS:ITEM:NORM?
Response :MEASURE:ITEM:NORMAL 1,1,1,0,0,1,0,0 (WHEN HEADER IS ON)
1,1,1,0,0,1,0,0 (WHEN HEADER IS OFF)
Note When this command is used to turn U to ON, all U items in the specified Channel
(:MEASure:ITEM:U) will be ON, when it is used to turn U to OFF, all U items in the specified
channel will be OFF.
When this command is used to turn I to ON, all I items in the specified Channel
(:MEASure:ITEM:I) will be ON, when it is used to turn I to OFF, all I items in the specified
channel will be OFF.
To specify individually saved items in the U data and I data,
use :MEASure:ITEM:U, :MEASure:ITEM:I Command after this command is executed.
During Query, if even 1 item of each of the channel is turned to ON, the channel will become
ON.