Hioki PW3390 Instruction Manual Download Page 29

Page: 29 / 108

PW3390 Power Analyzer Communication Command Instruction Manual Second Edition

29/107

Set and Query Current Range

Syntax

Command

:CURRent[CH]:RANGe <Current Range(NR2)>

Query

:CURRent[CH]:RANGe?

[CH]

････

1,2,3,4

Response

0.1/0.2/0.4/0.5/0.8/1/2/4/5/8/10/20/40/50/80/

100/200/400/500/800/1000/2000/4000/8000/20000

Description

Command

Specifies the current range suitable for the sensor. (Unit is [A])

Query

Queries the current range setting. Returns the current range as a numerical

value in NR2 format.

Example

Command

:CURR1:RANG 1.0

Set the current Channel 1 to 1A range.

Query

:CURR1:RANG?

Response

:CURRENT1:RANGE 1.0 (WHEN HEADER IS ON)

1.0 (WHEN HEADER IS OFF)

Note

• Do not add a unit to the measurement range.

• Wait until the internal circuit has stabilized after changing a range before reading

measurements.

• When the range is specified, the auto range of the specified channel will be OFF.

• By combining measurement lines (for above IP3W), the settings for the current ranges of

other channels which are combined are also changed.

Summary of Contents for PW3390













































































































Search results

Summary of Contents for PW3390

Reviews:

Related manuals for PW3390

Brands by name

Popular brands

Hioki PW3390, Instruction Manual

Search results

Summary of Contents for PW3390

Reviews:

Related manuals for PW3390

Brands by name

Popular brands