Hioki PW3390, Instruction Manual

Page: 37 / 108

PW3390 Power Analyzer Communication Command Instruction Manual Second Edition
37/107
Set and Query Saved Items of Normal Measurement Values in Respective Channels
Syntax Command :DATAout:ITEM:NORMal <U Data>,<I Data>,<P Data>,<S Data>,
<Q Data>,<PF Data>,<DEG Data>,<FREQ Data>
Query :DATAout:ITEM:NORMal?
Response <U Data>,<I Data>,<P Data>,<S Data>,<Q Data>,
<PF Data>,<DEG Data>,<FREQ Data>
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
U Data - - - - U4 U3 U2 U1
I Data - - - - I4 I3 I2 I1
P Data - - - - P4 P3 P2 P1
S Data - - - - S4 S3 S2 S1
Q Data - - - - Q4 Q3 Q2 Q1
PF Data - - - - PF4 PF3 PF2 PF1
DEG Data - - - - DEG4 DEG3 DEG2 DEG1
FREQ Data - - - - FREQ4 FREQ3 FREQ2 FREQ1
Description Command Sets the saved normal measurement value items to the
numerical value 0 - 255.
Query Returns the saved normal measurement value items of the respective
channels as numerical values.
Example Command :DATA:ITEM:NORM 1,1,1,0,0,1,0,0
Set the voltage, current, effective power and power factor data of Channel 1
to ON.
Query :DATA:ITEM:NORM?
Response :DATAOUT:ITEM:NORMAL 1,1,1,0,0,1,0,0 (WHEN HEADER IS ON)
1,1,1,0,0,1,0,0 (WHEN HEADER IS OFF)
Note Under this command, when U is turned to ON, all the U items in the specified channel
(:DATAout:ITEM:U) become ON, and when U is turned OFF, all the U items in the specified
channel become OFF.
(:DATAout:ITEM:I) become ON, and when I is turned OFF, all the I items in the specified
channel become OFF.
To specify individually saved items in the U data and I data,
use :DATAout:ITEM:U, :DATAout:ITEM:I after this command is executed.
During Query, if even 1 item in the channel is turned to ON, the channel will become ON.