Hioki LR5031, Instruction Manual

Page: 95 / 101

9.4 Error Display
94
The display appears as follows when an error occurs on the logger.
9.4 Error Display
Logger Error Displays
Error Displays Meaning Remedies and References
Calibration data error:
A fault occurred with the internal
calibration data. Inspection and repair is required.
Please contact your dealer or Hioki
representative.
See: "Requesting repairs" (p.91) Microcomputer error:
A fault occurred in microcomputer
ROM/RAM.
Data recording error:
A fault occurred in recording data
or accessing settings.
Battery voltage is too low for nor-
mal logger operation.
Replace the battery.
See: "2.1 Installing (or Replacing)
the Battery" (p.19)
or
A measured value is out of range.
Out-of-range values cannot be dis-
played.
[OF] or [UF] is displayed when this
data is imported by the LR5000 Utility
Program.
LR5000 Utility Program Error Displays
Error Displays Meaning Remedies and References
OF
A measured value is out of range.
Out-of-range values cannot be dis-
played.
UF
www. .com
information@itm.com 1.800.561.8187