![background image](http://html.mh-extra.com/html/seuic/autoid-6-series/autoid-6-series_quick-start-manual_1247463001.webp)
JIANGSU SEUIC TECHNOLOGY CO., LTD
QUICK START GUIDE
Apply series:
AUTOID® 6 series
AUTOID® 6C series
Charging indicator
Fig. 2
Fig.1
Scan
button
Power
on/off
Stylus Silo
Hand belt fixing base
SIM card slot
Memory card
slot
End flap cable port
Scan indicator
Install battery and battery cover
Initial Use
Power on
Power off
Sleep Mode
Reset the device
Take out the device, the battery and the stylus from the
package, install the battery and battery cover in according to
the instruction signs.
Please ensure the battery is fully charged to boost up the
system.
Press the Power on/off button until the PDA vibrates.
Either scan button on both sides of the device.
Press and release the above mentioned three keys at the same
time to reset the device.
Keyboard scan button.
Keyboard power button.
How to reset the device:
JIANGSU SEUIC TECHNOLOGY CO., LTD
Company address: NO.15.Xinghuo Road
Nanjing New High Technology Industry Zone, Nanjing City,
Jiangsu Province, China
Hotline: 0086-400-777-0876
Company official website: www.seuic.com
Products official website: www.chinaautoid.net
Mailbox: [email protected]
Post code: 210061
Press the power on/off button for 3 seconds, tap Off on the
prompted operation interface and the device shuts off. Or press
the Power on/off button for at least 5 seconds, the indicator on
the right corner goes off and device shuts off.
Press the Power on/off for 1 second during working status,
the device enters into sleep mode. Or the users can press the
Power on/off for at least 3 seconds for the promoted
operation interface, tap Sleep Mode to enter into sleep.
Touch Screen