Hioki LR5031 Page 54 Instruction Manual Download

Page: 54 / 101

4.5 Automatically Importing (Saving) Recorded Data to a Computer, and Graph Display

Chapter 4 M

easure

ment a

d Analy

The viewer screen appears as follows.

Viewer Screen

Items to be
displayed are
selectable.
(p.58)

Displayed graphs
and tables can be
printed. (p.64)

Reloads and re-
freshes recorded
data from a file.

Displays the

[Statistical In-

formation and Item Set-
tings]

dialog box when a

graph is displayed. (p.56)

Click the buttons to
switch between graph
and table displays.

Displays the

[Graph Set-

tings]

dialog box when a

graph is displayed. (p.54)

The graph or table is displayed.

See:

"Menu Bar Items" (p.52)

Opens a file containing
recorded data.

The displayed
time span can
be specified.

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for LR5031






































































































Search results

Summary of Contents for LR5031

Reviews:

Related manuals for LR5031

Brands by name

Popular brands

Hioki LR5031, Instruction Manual

Search results

Summary of Contents for LR5031

Reviews:

Related manuals for LR5031

Brands by name

Popular brands