2.1 Supplying Power
32
Procedure
1.
Turn off power and disconnect all the
test leads from the tester.
❖
See 2.2 "Turning Power On and Off" (page 44).
2.
Loosen the set screw on the rear of the
tester and remove the battery cover.
• When the battery status indicator
is low, replace the batteries.
• Use the specified batteries only. Do not use
manganese batteries, for example, since
operating time will be greatly reduced.
• To avoid corrosion from battery leakage,
remove the batteries from the instrument
if it is to be stored for a long time.
Set screw
Remove
Battery cover
www.
.com
1.800.561.8187