Hioki 3455 Page 130 Instruction Manual Download

Page: 130 / 181

6.2 Changing and Checking Voltage Application Time for
Step Voltage Test

128

Press the

key.

The time changes from blinking to con-
tinuously lit.
Setting of the time has been completed.

• The time can be set up on a PC using the

data analysis software for 3455.

• The data analysis software for 3455 must

be installed on the PC.

❖

Details

→

See 6.4 "Communicating with PC"

(page 134).

6.2.2

Checking Time Setting

Procedure

Press the

key while in standby

state, and the voltage indication will
blink.

Choose a step voltage test mode
([

STEP2.50 kVSET

] or [

STEP5.00

kVSET

]) and press the

key.

The time for one step appears.

The time can also be set up on a PC

Interval for
1 step

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 3455






















































































































































































Search results

Summary of Contents for 3455

Reviews:

Related manuals for 3455

Brands by name

Popular brands

Hioki 3455, Instruction Manual

Search results

Summary of Contents for 3455

Reviews:

Related manuals for 3455

Brands by name

Popular brands