5.1 Recording Measurement Data
1
2
3
4
5
6
7
8
9
10
11
付録
索引
109
• To exit the setup screen, press the
key. No changes will be made to the set-
tings.
• To exit the logging recording mode, press
the
key.
When held data is displayed, logging
recording cannot be selected.
Hold down the
key for more than one
second to erase the held data and then per-
form the operation below.
Procedure
1.
Press the
key in standby state.
[
MEMO No.
] lights up and the available
No. next to the last stored No. blinks.
Exiting Setup Screen or Logging Recording
Mode
Setting Data No.
Logging recording is not available in the
step voltage test mode (the voltage setting
is STEP) or in the temperature correction
mode ([
TC
] is on).
❖
Change the voltage setting
→
3.2.1 Procedure 5. - 8. (page 60)
❖
Exit temperature correction mode.
→
4.3.2 "Exiting Temperature Correction Mode"
(page 92)
www.
.com
1.800.561.8187
