ID5000 Series Smart Code Reader User Manual
26
Figure 8-2 Once or Continuous Exposure
Alternate Exposure
Steps
1. Right click the device in
Device Connection
, and click
Feature Tree
.
2. Go to
Image Setting
, and enable
Exposure Alternate
.
3. Select one exposure parameter from
Exposure Index
.
4. Enable
Exposure Enable
and enter
Exposure Time
according to actual demands.
5. Repeat step 3 and step 4 to set multiple exposure parameters according to actual demands.
Figure 8-3 Alternate Exposure
Note
The alternate exposure parameter may differ by device firmware versions and models.
8.1.3 Set Gain
The device supports four types of gain modes, including off, once, continuous, and alternate. Refer
to the table below for details.
Summary of Contents for ID5000 Series
