HikRobot ID5000 Series, User Manual

Page: 77 / 107

ID5000 Series Smart Code Reader User Manual
68
If the length of a barcode is shorter (in terms of the number of characters contained in the
barcode) than the configured value, the device will not parse the contents of the barcode. The
valid value is from 1 to 256. For example, if you set the value as 6, the device will not parse the
contents of the barcodes which contain less than 6 characters.
Max. Code Length
If the length of a barcode is longer ((in terms of the number of characters contained in the barcode)
than the configured value, the device will not parse the contents of the barcode. The valid value
is from 1 to 256. For example, if you set the value as 9, the device will not parse the contents of
the barcodes which contain more than 9 characters.
Read Times Threshold
If the reading results of a barcode is same for the configured times, the barcode will be
regarded as valid and its reading result will be outputted. Or the barcode will be regarded as
invalid and its reading result will not be outputted.
Figure 8-55 Regular Expression Filter Mode
8.6.3 Set Result Format
Result format settings allow you to set the format and contents contained in the outputted barcode
information. Result format is related to communication protocol and trigger mode. With different
selected communication protocol and trigger mode, you need to set corresponding parameters.
Note
● Result format settings are only available if you select Smart SDK , TCP Client, TCP Server, Serial,
FTP, Profinet, Melsec, Ethernet/IP, ModBus , Fins , and SLMP as the communication protocol
when the device mode is Normal .