HikRobot ID5000 Series, User Manual

Page: 25 / 107

ID5000 Series Smart Code Reader User Manual
16
5.2 Turn off Firewall
To ensure stable client running and image transmission, you are recommended turning off
Windows firewall before using the client software.
Steps
Note
For different Windows versions, the path name or interface may differ. Please refer to the
actual condition.
1. Go to Windows Firewall.
Windows XP system: Click
Start → Control Panel → Security Center → Windows Firewall .
Windows 7 system: Click Start → Control Panel → Windows Firewall .
Windows 10 system: Click Start → Control Panel → System and Security → Windows Defender
Firewall .
2. Click Turn Windows Defender Firewall on or off on the left.
3. Select Turn off Windows Defender Firewall (not recommended) .
Figure 5-2 Windows Defender Firewall
4. Click OK .
5.3 Set PC Network
To ensure stable image transmission and normal communication between the PC and the device
via client software, you need to set the PC network before using the client software.
Steps
Note
For different Windows versions, the specific setting path and interface may differ. Please refer
to the actual condition.
1. Go to PC network settings page: Start → Control Panel → Network and Internet → Network
and Sharing Center → Change adapter settings .
2. Select NIC and set the IP obtainment mode.
● Select Obtain an IP address automatically to get an IP address of the PC automatically.
● Or select Use the following IP address to set an IP address for the PC manually.